Хм.. да вроде 2гб свободно.. Конфиги вот.. config.inc.php
<?php
// Разрешаем использование не-UTF-8 кодировок (для совместимости с MySQL3).
define('PMA_REMOVED_NON_UTF_8', 1);
/* $Id$ */
// vim: expandtab sw=4 ts=4 sts=4:
/**
* phpMyAdmin Configuration File
*
* All directives are explained in Documentation.html
*/
/**
* Sets the php error reporting - Please do not change this line!
*/
if (!isset($old_error_reporting)) {
error_reporting(E_ALL);
@ini_set('display_errors', '1');
}
/**
* Your phpMyAdmin url
*
* Complete the variable below with the full url ie
* <a href="http://www.your_web.net/path_to_your_phpMyAdmin_directory/">http://www.your_web.net/path_to_your_ph … directory/</a>
*
* It must contain characters that are valid for a URL, and the path is
* case sensitive on some Web servers, for example Unix-based servers.
*
* In most cases you can leave this variable empty, as the correct value
* will be detected automatically. However, we recommend that you do
* test to see that the auto-detection code works in your system. A good
* test is to browse a table, then edit a row and save it. There will be
* an error message if phpMyAdmin cannot auto-detect the correct value.
*
* If the auto-detection code does work properly, you can set to TRUE the
* $cfg['PmaAbsoluteUri_DisableWarning'] variable below.
*/
$cfg['PmaAbsoluteUri'] = (!empty($_SERVER['HTTPS']) ? 'https' : 'http') . '<img src="img/smilies/hmm.png" width="15" height="15" alt="hmm" />/'
. $_SERVER['HTTP_HOST']
. substr($_SERVER['PHP_SELF'], 0, strrpos($_SERVER['PHP_SELF'], '/')+1);
/**
* Disable the default warning about $cfg['PmaAbsoluteUri'] not being set
* You should use this if and ONLY if the PmaAbsoluteUri auto-detection
* works perfectly.
*/
$cfg['PmaAbsoluteUri_DisableWarning'] = FALSE;
/**
* Disable the default warning that is displayed on the DB Details Structure page if
* any of the required Tables for the relationfeatures could not be found
*/
$cfg['PmaNoRelation_DisableWarning'] = FALSE;
/**
* The 'cookie' auth_type uses blowfish algorithm to encrypt the password. If
* at least one server configuration uses 'cookie' auth_type, enter here a
* passphrase that will be used by blowfish.
*/
$cfg['blowfish_secret'] = '';
/**
* Server(s) configuration
*/
$i = 0;
// The $cfg['Servers'] array starts with $cfg['Servers'][1]. Do not use $cfg['Servers'][0].
// You can disable a server config entry by setting host to ''.
$i++;
$cfg['Servers'][$i]['host'] = 'localhost'; // MySQL hostname or IP address
$cfg['Servers'][$i]['port'] = ''; // MySQL port - leave blank for default port
$cfg['Servers'][$i]['socket'] = ''; // Path to the socket - leave blank for default socket
$cfg['Servers'][$i]['connect_type'] = 'tcp'; // How to connect to MySQL server ('tcp' or 'socket')
$cfg['Servers'][$i]['extension'] = 'mysql'; // The php MySQL extension to use ('mysql' or 'mysqli')
$cfg['Servers'][$i]['compress'] = FALSE; // Use compressed protocol for the MySQL connection
// (requires PHP >= 4.3.0)
$cfg['Servers'][$i]['controluser'] = ''; // MySQL control user settings
// (this user must have read-only
$cfg['Servers'][$i]['controlpass'] = ''; // access to the "mysql/user"
// and "mysql/db" tables).
// The controluser is also
// used for all relational
// features (pmadb)
$cfg['Servers'][$i]['auth_type'] = 'config'; // Authentication method (config, http or cookie based)?
$cfg['Servers'][$i]['user'] = 'root'; // MySQL user
$cfg['Servers'][$i]['password'] = ''; // MySQL password (only needed
// with 'config' auth_type)
$cfg['Servers'][$i]['only_db'] = ''; // If set to a db-name, only
// this db is displayed in left frame
// It may also be an array of db-names, where sorting order is relevant.
$cfg['Servers'][$i]['verbose'] = ''; // Verbose name for this host - leave blank to show the hostname
$cfg['Servers'][$i]['pmadb'] = 'phpmyadmin'; // Database used for Relation, Bookmark and PDF Features
// (see scripts/create_tables.sql)
// - leave blank for no support
// DEFAULT: 'phpmyadmin'
$cfg['Servers'][$i]['bookmarktable'] = 'pma_bookmark'; // Bookmark table
// - leave blank for no bookmark support
// DEFAULT: 'pma_bookmark'
$cfg['Servers'][$i]['relation'] = 'pma_relation'; // table to describe the relation between links (see doc)
// - leave blank for no relation-links support
// DEFAULT: 'pma_relation'
$cfg['Servers'][$i]['table_info'] = 'pma_table_info'; // table to describe the display fields
// - leave blank for no display fields support
// DEFAULT: 'pma_table_info'
$cfg['Servers'][$i]['table_coords'] = 'pma_table_coords'; // table to describe the tables position for the PDF schema
// - leave blank for no PDF schema support
// DEFAULT: 'pma_table_coords'
$cfg['Servers'][$i]['pdf_pages'] = 'pma_pdf_pages'; // table to describe pages of relationpdf
// - leave blank if you don't want to use this
// DEFAULT: 'pma_pdf_pages'
$cfg['Servers'][$i]['column_info'] = 'pma_column_info'; // table to store column information
// - leave blank for no column comments/mime types
// DEFAULT: 'pma_column_info'
$cfg['Servers'][$i]['history'] = 'pma_history'; // table to store SQL history
// - leave blank for no SQL query history
// DEFAULT: 'pma_history'
$cfg['Servers'][$i]['verbose_check'] = TRUE; // set to FALSE if you know that your pma_* tables
// are up to date. This prevents compatibility
// checks and thereby increases performance.
$cfg['Servers'][$i]['AllowRoot'] = TRUE; // whether to allow root login
$cfg['Servers'][$i]['AllowDeny']['order'] // Host authentication order, leave blank to not use
= '';
$cfg['Servers'][$i]['AllowDeny']['rules'] // Host authentication rules, leave blank for defaults
= array();
$i++;
$cfg['Servers'][$i]['host'] = '';
$cfg['Servers'][$i]['port'] = '';
$cfg['Servers'][$i]['socket'] = '';
$cfg['Servers'][$i]['connect_type'] = 'tcp';
$cfg['Servers'][$i]['extension'] = 'mysql';
$cfg['Servers'][$i]['compress'] = FALSE;
$cfg['Servers'][$i]['controluser'] = '';
$cfg['Servers'][$i]['controlpass'] = '';
$cfg['Servers'][$i]['auth_type'] = 'config';
$cfg['Servers'][$i]['user'] = 'root';
$cfg['Servers'][$i]['password'] = '';
$cfg['Servers'][$i]['only_db'] = '';
$cfg['Servers'][$i]['verbose'] = '';
$cfg['Servers'][$i]['pmadb'] = ''; // 'phpmyadmin' - see scripts/create_tables.sql
$cfg['Servers'][$i]['bookmarktable'] = ''; // 'pma_bookmark'
$cfg['Servers'][$i]['relation'] = ''; // 'pma_relation'
$cfg['Servers'][$i]['table_info'] = ''; // 'pma_table_info'
$cfg['Servers'][$i]['table_coords'] = ''; // 'pma_table_coords'
$cfg['Servers'][$i]['pdf_pages'] = ''; // 'pma_pdf_pages'
$cfg['Servers'][$i]['column_info'] = ''; // 'pma_column_info'
$cfg['Servers'][$i]['history'] = ''; // 'pma_history'
$cfg['Servers'][$i]['verbose_check'] = TRUE;
$cfg['Servers'][$i]['AllowRoot'] = TRUE;
$cfg['Servers'][$i]['AllowDeny']['order']
= '';
$cfg['Servers'][$i]['AllowDeny']['rules']
= array();
$i++;
$cfg['Servers'][$i]['host'] = '';
$cfg['Servers'][$i]['port'] = '';
$cfg['Servers'][$i]['socket'] = '';
$cfg['Servers'][$i]['connect_type'] = 'tcp';
$cfg['Servers'][$i]['extension'] = 'mysql';
$cfg['Servers'][$i]['compress'] = FALSE;
$cfg['Servers'][$i]['controluser'] = '';
$cfg['Servers'][$i]['controlpass'] = '';
$cfg['Servers'][$i]['auth_type'] = 'config';
$cfg['Servers'][$i]['user'] = 'root';
$cfg['Servers'][$i]['password'] = '';
$cfg['Servers'][$i]['only_db'] = '';
$cfg['Servers'][$i]['verbose'] = '';
$cfg['Servers'][$i]['pmadb'] = ''; // 'phpmyadmin' - see scripts/create_tables.sql
$cfg['Servers'][$i]['bookmarktable'] = ''; // 'pma_bookmark'
$cfg['Servers'][$i]['relation'] = ''; // 'pma_relation'
$cfg['Servers'][$i]['table_info'] = ''; // 'pma_table_info'
$cfg['Servers'][$i]['table_coords'] = ''; // 'pma_table_coords'
$cfg['Servers'][$i]['pdf_pages'] = ''; // 'pma_pdf_pages'
$cfg['Servers'][$i]['column_info'] = ''; // 'pma_column_info'
$cfg['Servers'][$i]['history'] = ''; // 'pma_history'
$cfg['Servers'][$i]['verbose_check'] = TRUE;
$cfg['Servers'][$i]['AllowRoot'] = TRUE;
$cfg['Servers'][$i]['AllowDeny']['order']
= '';
$cfg['Servers'][$i]['AllowDeny']['rules']
= array();
// If you have more than one server configured, you can set $cfg['ServerDefault']
// to any one of them to autoconnect to that server when phpMyAdmin is started,
// or set it to 0 to be given a list of servers without logging in
// If you have only one server configured, $cfg['ServerDefault'] *MUST* be
// set to that server.
$cfg['ServerDefault'] = 1; // Default server (0 = no default server)
$cfg['Server'] = '';
unset($cfg['Servers'][0]);
/**
* Other core phpMyAdmin settings
*/
$cfg['OBGzip'] = 'auto'; // use GZIP output buffering if possible (TRUE|FALSE|'auto')
$cfg['PersistentConnections'] = FALSE; // use persistent connections to MySQL database
$cfg['ExecTimeLimit'] = 300; // maximum execution time in seconds (0 for no limit)
$cfg['SkipLockedTables'] = FALSE; // mark used tables, make possible to show
// locked tables (since MySQL 3.23.30)
$cfg['ShowSQL'] = TRUE; // show SQL queries as run
$cfg['AllowUserDropDatabase'] = FALSE; // show a 'Drop database' link to normal users
$cfg['Confirm'] = TRUE; // confirm 'DROP TABLE' & 'DROP DATABASE'
$cfg['LoginCookieRecall'] = TRUE; // recall previous login in cookie auth. mode or not
$cfg['LoginCookieValidity'] = 1800; // validity of cookie login (in seconds)
$cfg['UseDbSearch'] = TRUE; // whether to enable the "database search" feature
// or not
$cfg['IgnoreMultiSubmitErrors'] = FALSE; // if set to true, PMA continues computing multiple-statement queries
// even if one of the queries failed
$cfg['VerboseMultiSubmit'] = TRUE; // if set to true, PMA will show the affected rows of EACH statement on
// multiple-statement queries. See the read_dump.php file for hardcoded
// defaults on how many queries a statement may contain!
$cfg['AllowArbitraryServer'] = FALSE; // allow login to any user entered server in cookie based auth
// Left frame setup
$cfg['LeftFrameLight'] = TRUE; // use a select-based menu and display only the
// current tables in the left frame.
$cfg['LeftFrameTableSeparator']= '__'; // Which string will be used to generate table prefixes
// to split/nest tables into multiple categories
$cfg['LeftFrameTableLevel'] = '1'; // How many sublevels should be displayed when splitting
// up tables by the above Separator
$cfg['ShowTooltip'] = TRUE; // display table comment as tooltip in left frame
$cfg['ShowTooltipAliasDB'] = FALSE; // if ShowToolTip is enabled, this defines that table/db comments
$cfg['ShowTooltipAliasTB'] = FALSE; // are shown (in the left menu and db_details_structure) instead of
// table/db names. Setting ShowTooltipAliasTB to 'nested' will only
// use the Aliases for nested descriptors, not the table itself.
$cfg['LeftDisplayLogo'] = TRUE; // display logo at top of left frame
$cfg['LeftDisplayServers'] = FALSE; // display server choice at top of left frame
$cfg['DisplayServersList'] = FALSE; // server choice as links
// In the main frame, at startup...
$cfg['ShowStats'] = TRUE; // allow to display statistics and space usage in
// the pages about database details and table
// properties
$cfg['ShowMysqlInfo'] = FALSE; // whether to display the "MySQL runtime
$cfg['ShowMysqlVars'] = FALSE; // information", "MySQL system variables", "PHP
$cfg['ShowPhpInfo'] = FALSE; // information" and "change password" links for
$cfg['ShowChgPassword'] = FALSE; // simple users or not
$cfg['SuggestDBName'] = TRUE; // suggest a new DB name if possible (false = keep empty)
// In browse mode...
$cfg['ShowBlob'] = FALSE; // display blob field contents
$cfg['NavigationBarIconic'] = TRUE; // do not display text inside navigation bar buttons
$cfg['ShowAll'] = FALSE; // allows to display all the rows
$cfg['MaxRows'] = 30; // maximum number of rows to display
$cfg['Order'] = 'ASC'; // default for 'ORDER BY' clause (valid
// values are 'ASC', 'DESC' or 'SMART' -ie
// descending order for fields of type
// TIME, DATE, DATETIME & TIMESTAMP,
// ascending order else-)
// In edit mode...
$cfg['ProtectBinary'] = 'blob'; // disallow editing of binary fields
// valid values are:
// FALSE allow editing
// 'blob' allow editing except for BLOB fields
// 'all' disallow editing
$cfg['ShowFunctionFields'] = TRUE; // Display the function fields in edit/insert mode
$cfg['CharEditing'] = 'input';
// Which editor should be used for CHAR/VARCHAR fields:
// input - allows limiting of input length
// textarea - allows newlines in fields
$cfg['InsertRows'] = 2; // How many rows can be inserted at one time
// For the export features...
$cfg['ZipDump'] = TRUE; // Allow the use of zip/gzip/bzip
$cfg['GZipDump'] = TRUE; // compression for
$cfg['BZipDump'] = TRUE; // dump files
$cfg['CompressOnFly'] = TRUE; // Will compress gzip/bzip2 exports on
// fly without need for much memory.
// If you encounter problems with
// created gzip/bzip2 files disable
// this feature.
// Tabs display settings
$cfg['LightTabs'] = FALSE; // use graphically less intense menu tabs
$cfg['PropertiesIconic'] = TRUE; // Use icons instead of text for the table display of a database (TRUE|FALSE|'both')
$cfg['PropertiesNumColumns'] = 1; // How many columns should be used for table display of a database?
// (a value larger than 1 results in some information being hidden)
$cfg['DefaultTabServer'] = 'main.php';
// Possible values:
// 'main.php' = the welcome page
// (recommended for multiuser setups)
// 'server_databases.php' = list of databases
// 'server_status.php' = runtime information
// 'server_variables.php' = MySQL server variables
// 'server_privileges.php' = user management
// 'server_processlist.php' = process list
$cfg['DefaultTabDatabase'] = 'db_details_structure.php';
// Possible values:
// 'db_details_structure.php' = tables list
// 'db_details.php' = sql form
// 'db_search.php' = search query
// 'db_operations.php' = operations on database
$cfg['DefaultTabTable'] = 'tbl_properties_structure.php';
// Possible values:
// 'tbl_properties_structure.php' = fields list
// 'tbl_properties.php' = sql form
// 'tbl_select.php = select page
// 'tbl_change.php = insert row page
/**
* Export defaults
*/
$cfg['Export']['format'] = 'sql'; // sql/latex/excel/csv/xml/xls
$cfg['Export']['compression'] = 'none'; // none/zip/gzip/bzip2
$cfg['Export']['asfile'] = FALSE;
$cfg['Export']['onserver'] = FALSE;
$cfg['Export']['onserver_overwrite'] = FALSE;
$cfg['Export']['remember_file_template'] = TRUE;
$cfg['Export']['xls_columns'] = FALSE;
$cfg['Export']['xls_null'] = 'NULL';
$cfg['Export']['csv_columns'] = FALSE;
$cfg['Export']['csv_null'] = 'NULL';
$cfg['Export']['csv_separator'] = ';';
$cfg['Export']['csv_enclosed'] = '"';
$cfg['Export']['csv_escaped'] = '\\';
$cfg['Export']['csv_terminated'] = 'AUTO';
$cfg['Export']['excel_columns'] = FALSE;
$cfg['Export']['excel_null'] = 'NULL';
$cfg['Export']['excel_edition'] = 'win'; // win/mac
$cfg['Export']['latex_structure'] = TRUE;
$cfg['Export']['latex_data'] = TRUE;
$cfg['Export']['latex_columns'] = TRUE;
$cfg['Export']['latex_relation'] = TRUE;
$cfg['Export']['latex_comments'] = TRUE;
$cfg['Export']['latex_mime'] = TRUE;
$cfg['Export']['latex_null'] = '\textit{NULL}';
$cfg['Export']['latex_caption'] = TRUE;
$cfg['Export']['latex_data_label'] = 'tab:__TABLE__-data';
$cfg['Export']['latex_structure_label'] = 'tab:__TABLE__-structure';
$cfg['Export']['sql_structure'] = TRUE;
$cfg['Export']['sql_data'] = TRUE;
$cfg['Export']['sql_compat'] = 'NONE';
$cfg['Export']['sql_disable_fk'] = FALSE;
$cfg['Export']['sql_use_transaction'] = FALSE;
$cfg['Export']['sql_drop_database'] = FALSE;
$cfg['Export']['sql_drop_table'] = FALSE;
$cfg['Export']['sql_if_not_exists'] = FALSE;
$cfg['Export']['sql_auto_increment'] = TRUE;
$cfg['Export']['sql_backquotes'] = TRUE;
$cfg['Export']['sql_dates'] = FALSE;
$cfg['Export']['sql_relation'] = FALSE;
$cfg['Export']['sql_columns'] = FALSE;
$cfg['Export']['sql_delayed'] = FALSE;
$cfg['Export']['sql_ignore'] = FALSE;
$cfg['Export']['sql_hex_for_binary'] = TRUE;
$cfg['Export']['sql_type'] = 'insert'; // insert/update/replace
$cfg['Export']['sql_extended'] = FALSE;
$cfg['Export']['sql_comments'] = FALSE;
$cfg['Export']['sql_mime'] = FALSE;
$cfg['Export']['sql_header_comment'] = ''; // \n is replaced by new line
/**
* Link to the official MySQL documentation.
* Be sure to include no trailing slash on the path.
* See <a href="http://dev.mysql.com/doc/">http://dev.mysql.com/doc/</a> for more information
* about MySQL manuals and their types.
*/
$cfg['MySQLManualBase'] = 'http://dev.mysql.com/doc/mysql/en';
/**
* Type of MySQL documentation:
* old - old style used in phpMyAdmin 2.3.0 and sooner
* searchable - "Searchable, with user comments"
* chapters - "HTML, one page per chapter"
* big - "HTML, all on one page"
* none - do not show documentation links
*/
$cfg['MySQLManualType'] = 'searchable';
/**
* PDF options
*/
$cfg['PDFPageSizes'] = array('A3', 'A4', 'A5', 'letter', 'legal');
$cfg['PDFDefaultPageSize'] = 'A4';
/**
* Language and charset conversion settings
*/
// Default language to use, if not browser-defined or user-defined
$cfg['DefaultLang'] = 'en-iso-8859-1';
// Force: always use this language - must be defined in
// libraries/select_lang.lib.php
// $cfg['Lang'] = 'en-iso-8859-1';
// Default charset to use for recoding of MySQL queries, does not take
// any effect when charsets recoding is switched off by
// $cfg['AllowAnywhereRecoding'] or in language file
// (see $cfg['AvailableCharsets'] to possible choices, you can add your own)
$cfg['DefaultCharset'] = 'iso-8859-1';
// Allow charset recoding of MySQL queries, must be also enabled in language
// file to make harder using other language files than unicode.
// Default value is FALSE to avoid problems on servers without the iconv
// extension and where dl() is not supported
$cfg['AllowAnywhereRecoding'] = function_exists("iconv");
// You can select here which functions will be used for charset conversion.
// Possible values are:
// auto - automatically use available one (first is tested iconv, then
// recode)
// iconv - use iconv or libiconv functions
// recode - use recode_string function
$cfg['RecodingEngine'] = 'auto';
// Specify some parameters for iconv used in charset conversion. See iconv
// documentation for details:
// <a href="http://www.gnu.org/software/libiconv/documentation/libiconv/iconv_open.3.html">http://www.gnu.org/software/libiconv/do … pen.3.html</a>
$cfg['IconvExtraParams'] = '';
// Available charsets for MySQL conversion. currently contains all which could
// be found in lang/* files and few more.
// Charsets will be shown in same order as here listed, so if you frequently
// use some of these move them to the top.
$cfg['AvailableCharsets'] = array(
'iso-8859-1',
'iso-8859-2',
'iso-8859-3',
'iso-8859-4',
'iso-8859-5',
'iso-8859-6',
'iso-8859-7',
'iso-8859-8',
'iso-8859-9',
'iso-8859-10',
'iso-8859-11',
'iso-8859-12',
'iso-8859-13',
'iso-8859-14',
'iso-8859-15',
'windows-1250',
'windows-1251',
'windows-1252',
'windows-1256',
'windows-1257',
'koi8-r',
'big5',
'gb2312',
'utf-8',
'utf-7',
'x-user-defined',
'euc-jp',
'ks_c_5601-1987',
'tis-620',
'SHIFT_JIS'
);
/**
* Customization & design
*
* The graphical settings are now located in themes/themename/layout.inc.php
*/
$cfg['LeftPointerEnable'] = TRUE; // enable the left panel pointer
// (used when LeftFrameLight is FALSE)
// see also LeftPointerColor
// in layout.inc.php
$cfg['BrowsePointerEnable'] = TRUE; // enable the browse pointer
// see also BrowsePointerColor
// in layout.inc.php
$cfg['BrowseMarkerEnable'] = TRUE; // enable the browse marker
// see also BrowseMarkerColor
// in layout.inc.php
$cfg['TextareaCols'] = 40; // textarea size (columns) in edit mode
// (this value will be emphasized (*2) for sql
// query textareas and (*1.25) for query window)
$cfg['TextareaRows'] = 7; // textarea size (rows) in edit mode
$cfg['LongtextDoubleTextarea'] = TRUE; // double size of textarea size for longtext fields
$cfg['TextareaAutoSelect'] = TRUE; // autoselect when clicking in the textarea of the querybox
$cfg['CharTextareaCols'] = 40; // textarea size (columns) for CHAR/VARCHAR
$cfg['CharTextareaRows'] = 2; // textarea size (rows) for CHAR/VARCHAR
$cfg['CtrlArrowsMoving'] = TRUE; // Enable Ctrl+Arrows moving between fields when editing?
$cfg['LimitChars'] = 50; // Max field data length in browse mode for all non-numeric fields
$cfg['ModifyDeleteAtLeft'] = TRUE; // show edit/delete links on left side of browse
// (or at the top with vertical browse)
$cfg['ModifyDeleteAtRight'] = FALSE; // show edit/delete links on right side of browse
// (or at the bottom with vertical browse)
$cfg['DefaultDisplay'] = 'horizontal'; // default display direction
// (horizontal|vertical|horizontalflipped)
$cfg['DefaultPropDisplay'] = 'horizontal'; // default display direction for altering/
// creating columns (tbl_properties)
// (horizontal|vertical)
$cfg['HeaderFlipType'] = 'css'; // table-header rotation via faking or css? (css|fake)
// NOTE: CSS only works in IE browsers!
$cfg['ShowBrowseComments'] = TRUE; // shows stored relation-comments in 'browse' mode.
$cfg['ShowPropertyComments']= TRUE; // shows stored relation-comments in 'table property' mode.
$cfg['RepeatCells'] = 100; // repeat header names every X cells? (0 = deactivate)
$cfg['QueryFrame'] = TRUE; // displays a link or icon in the left frame to open the querybox, and activates the querybox when clicking on [Edit] on the results page.
$cfg['QueryFrameJS'] = TRUE; // whether to use JavaScript functions for opening a new window for SQL commands.
// if set to 'false', the target of the querybox is always the right frame.
$cfg['QueryWindowWidth'] = 550; // Width of Query window
$cfg['QueryWindowHeight'] = 310; // Height of Query window
$cfg['QueryHistoryDB'] = FALSE; // Set to TRUE if you want DB-based query history.
// If FALSE, this utilizes JS-routines to display
// query history (lost by window close)
$cfg['QueryWindowDefTab'] = 'sql'; // which tab to display in the querywindow on startup
// (sql|files|history|full)
$cfg['QueryHistoryMax'] = 25; // When using DB-based query history, how many entries
// should be kept?
$cfg['BrowseMIME'] = TRUE; // Use MIME-Types (stored in column comments table) for
$cfg['MaxExactCount'] = 20000; // When approximate count < this, PMA will get exact count for
// table rows.
$cfg['WYSIWYG-PDF'] = TRUE; // Utilize DHTML/JS capabilities to allow WYSIWYG editing of
// the PDF page editor. Requires an IE6/Mozilla based browser.
$cfg['NaturalOrder'] = TRUE; // Sort table and database in natural order
//-----------------------------------------------------------------------------
// custom-setup by mkkeck: 2004-05-04
// some specials for new icons and scrollings
// FIXME:
// 2004-05-08 rabus: We need to rearrange these variables.
$cfg['ShowHttpHostTitle'] = TRUE; // show HttpHost in browsers window title (true|false)?
$cfg['SetHttpHostTitle'] = ''; // if ShowHttpHostTitle=true, please set your host (server)
// or an other string, wich should be shown in browsers window title.
// If not set (or empty), the PMA will get your real Host-Adress.
$cfg['ErrorIconic'] = TRUE; // show some icons for warning, error and information messages (true|false)?
$cfg['MainPageIconic'] = TRUE; // show icons in list on main page, on right panel top menu (server db table) and on menu tabs (true|false)?
$cfg['ReplaceHelpImg'] = TRUE; // show help button instead of strDocumentation (true|false)?
// theme manager
$cfg['ThemePath'] = './themes'; // using themes manager please set up here the path to 'themes'
// else leave empty
$cfg['ThemeManager'] = TRUE; // if you want to use selectable themes and if ThemesPath not empty
// set it to true, else set it to false (default is false);
$cfg['ThemeDefault'] = 'original'; // set up default theme, if ThemePath not empty
// you can set up here an valid path to themes or 'original' for
// the original pma-theme
//-----------------------------------------------------------------------------
/**
* Default queries
* %d will be replaced by the database name.
* %t will be replaced by the table name.
* %f will be replaced by a list of field names.
* (%t and %f only applies to DefaultQueryTable)
*/
$cfg['DefaultQueryTable'] = 'SELECT * FROM %t WHERE 1';
$cfg['DefaultQueryDatabase'] = '';
/**
* SQL Query box settings
* These are the links display in all of the SQL Query boxes
*/
$cfg['SQLQuery']['Edit'] = TRUE; // Edit link to change a query
$cfg['SQLQuery']['Explain'] = TRUE; // EXPLAIN on SELECT queries
$cfg['SQLQuery']['ShowAsPHP'] = TRUE; // Wrap a query in PHP
$cfg['SQLQuery']['Validate'] = FALSE; // Validate a query (see $cfg['SQLValidator'] as well)
$cfg['SQLQuery']['Refresh'] = TRUE; // Refresh the results page
/**
* Webserver upload/save/import directories
*/
$cfg['UploadDir'] = ''; // Directory for uploaded files that can be executed by
// phpMyAdmin. For example './upload'. Leave empty for
// no upload directory support
$cfg['SaveDir'] = ''; // Directory where phpMyAdmin can save exported data on
// server. For example './save'. Leave empty for no save
// directory support.
$cfg['docSQLDir'] = ''; // Directory for docSQL imports, phpMyAdmin can import
// docSQL files from that directory. For example
// './docSQL'. Leave empty for no docSQL import support.
$cfg['TempDir'] = ''; // Directory where phpMyAdmin can save temporary files.
// This is needed for MS Excel export, see documentation
// how to enable that.
/**
* Misc. settings
*/
$cfg['GD2Available'] = 'auto'; // Is GD >= 2 available? Set to yes/no/auto. 'auto'
// does autodetection, which is a bit expensive for
// php < 4.3.0, but it is the only safe vay how to
// determine GD version.
/**
* SQL Parser Settings
*/
$cfg['SQP']['fmtType'] = 'html'; // Pretty-printing style to use on queries (html, text, none)
$cfg['SQP']['fmtInd'] = '1'; // Amount to indent each level (floats ok)
$cfg['SQP']['fmtIndUnit'] = 'em'; // Units for indenting each level (CSS Types - {em,px,pt})
// The graphical settings are now located in themes/themename/layout.inc.php
/**
* If you wish to use the SQL Validator service, you should be
* aware of the following:
* All SQL statements are stored anonymously for statistical purposes.
* Mimer SQL Validator, Copyright 2002 Upright Database Technology.
* All rights reserved.
*/
$cfg['SQLValidator']['use'] = FALSE; // Make the SQL Validator available
$cfg['SQLValidator']['username'] = ''; // If you have a custom username, specify it here (defaults to anonymous)
$cfg['SQLValidator']['password'] = ''; // Password for username
/**
* Developers ONLY!
* To use the following, please install the DBG extension from <a href="http://dd.cron.ru/dbg/">http://dd.cron.ru/dbg/</a>
*/
$cfg['DBG']['enable'] = FALSE; // Make the DBG stuff available
$cfg['DBG']['profile']['enable'] = FALSE; // Produce profiling results of PHP
$cfg['DBG']['profile']['threshold'] = 0.5; // Threshold of long running code to display
// Anything below the threshold is not displayed
/**
* MySQL settings
*/
// Column types;
// varchar, tinyint, text and date are listed first, based on estimated popularity
$cfg['ColumnTypes'] = array(
'VARCHAR',
'TINYINT',
'TEXT',
'DATE',
'SMALLINT',
'MEDIUMINT',
'INT',
'BIGINT',
'FLOAT',
'DOUBLE',
'DECIMAL',
'DATETIME',
'TIMESTAMP',
'TIME',
'YEAR',
'CHAR',
'TINYBLOB',
'TINYTEXT',
'BLOB',
'MEDIUMBLOB',
'MEDIUMTEXT',
'LONGBLOB',
'LONGTEXT',
'ENUM',
'SET'
);
// Attributes
$cfg['AttributeTypes'] = array(
'',
'BINARY',
'UNSIGNED',
'UNSIGNED ZEROFILL'
);
// Available functions
if ($cfg['ShowFunctionFields']) {
$cfg['Functions'] = array(
'ASCII',
'CHAR',
'SOUNDEX',
'LCASE',
'UCASE',
'NOW',
'PASSWORD',
'MD5',
'SHA1',
'ENCRYPT',
'RAND',
'LAST_INSERT_ID',
'COUNT',
'AVG',
'SUM',
'CURDATE',
'CURTIME',
'FROM_DAYS',
'FROM_UNIXTIME',
'PERIOD_ADD',
'PERIOD_DIFF',
'TO_DAYS',
'UNIX_TIMESTAMP',
'USER',
'WEEKDAY',
'CONCAT'
);
// Which column types will be mapped to which Group?
$cfg['RestrictColumnTypes'] = array(
'VARCHAR' => 'FUNC_CHAR',
'TINYINT' => 'FUNC_NUMBER',
'TEXT' => 'FUNC_CHAR',
'DATE' => 'FUNC_DATE',
'SMALLINT' => 'FUNC_NUMBER',
'MEDIUMINT' => 'FUNC_NUMBER',
'INT' => 'FUNC_NUMBER',
'BIGINT' => 'FUNC_NUMBER',
'FLOAT' => 'FUNC_NUMBER',
'DOUBLE' => 'FUNC_NUMBER',
'DECIMAL' => 'FUNC_NUMBER',
'DATETIME' => 'FUNC_DATE',
'TIMESTAMP' => 'FUNC_DATE',
'TIME' => 'FUNC_DATE',
'YEAR' => 'FUNC_DATE',
'CHAR' => 'FUNC_CHAR',
'TINYBLOB' => 'FUNC_CHAR',
'TINYTEXT' => 'FUNC_CHAR',
'BLOB' => 'FUNC_CHAR',
'MEDIUMBLOB' => 'FUNC_CHAR',
'MEDIUMTEXT' => 'FUNC_CHAR',
'LONGBLOB' => 'FUNC_CHAR',
'LONGTEXT' => 'FUNC_CHAR',
'ENUM' => '',
'SET' => ''
);
// Map above defined groups to any function
$cfg['RestrictFunctions'] = array(
'FUNC_CHAR' => array(
'ASCII',
'CHAR',
'SOUNDEX',
'LCASE',
'UCASE',
'PASSWORD',
'MD5',
'SHA1',
'ENCRYPT',
'LAST_INSERT_ID',
'USER',
'CONCAT'
),
'FUNC_DATE' => array(
'NOW',
'CURDATE',
'CURTIME',
'FROM_DAYS',
'FROM_UNIXTIME',
'PERIOD_ADD',
'PERIOD_DIFF',
'TO_DAYS',
'UNIX_TIMESTAMP',
'WEEKDAY'
),
'FUNC_NUMBER' => array(
'ASCII',
'CHAR',
'MD5',
'SHA1',
'ENCRYPT',
'RAND',
'LAST_INSERT_ID',
'UNIX_TIMESTAMP',
'COUNT',
'AVG',
'SUM'
)
);
// Default functions for above defined groups
$cfg['DefaultFunctions'] = array(
'FUNC_CHAR' => '',
'FUNC_DATE' => '',
'FUNC_NUMBER' => '',
'first_timestamp' => 'NOW'
);
} // end if
// Search operators
$cfg['NumOperators'] = array(
'=',
'>',
'>=',
'<',
'<=',
'!=',
'LIKE',
'NOT LIKE'
);
$cfg['TextOperators'] = array(
'LIKE',
'LIKE %...%',
'NOT LIKE',
'=',
'!=',
'REGEXP',
'NOT REGEXP'
);
$cfg['EnumOperators'] = array(
'=',
'!='
);
$cfg['NullOperators'] = array(
'IS NULL',
'IS NOT NULL'
);
$cfg['UnaryOperators'] = array(
'IS NULL' => 1,
'IS NOT NULL' => 1
);
/**
* Unset magic_quotes_runtime - do not change!
*/
set_magic_quotes_runtime(0);
/**
* File Revision - do not change either!
*/
$cfg['FileRevision'] = '$Revision$';
?>
my. conf
# +-------------------------------------------------------------------------+
# | Джентльменский набор Web-разработчика |
# | Версия: Денвер-3 2008-01-13 |
# +-------------------------------------------------------------------------+
# | Copyright (C) 2001-2007 Дмитрий Котеров. |
# +-------------------------------------------------------------------------+
# | Данный файл является частью комплекса программ "Денвер-3". Вы не можете |
# | использовать его в коммерческих целях. Никакие другие ограничения не |
# | накладываются. Если вы хотите внести изменения в исходный код, авторы |
# | будут рады получить от вас комментарии и замечания. Приятной работы! |
# +-------------------------------------------------------------------------+
# | Домашняя страница: <a href="http://denwer.ru">http://denwer.ru</a> |
# | Контакты: <a href="http://forum.dklab.ru/denwer">http://forum.dklab.ru/denwer</a> |
# +-------------------------------------------------------------------------+
##
## Конфигурация MySQL, не очень требовательная к системным ресурсам.
##
#
# Следующие параметры будут переданы всем клиентским программам
# (например, mysql.exe). ВНИМАНИЕ: если не сработает, укажите
# путь к my.cnf ЯВНО, например:
#
# mysql.exe --defaults-file=/usr/local/mysql5/my.cnf ...
#
[client]
port = 3306
socket = /tmp/mysql5.sock
default-character-set = cp1251
character-sets-dir = /usr/local/mysql5/share/charsets
#
# Параметры MySQL-сервера.
#
[mysqld]
max_connections = 10000
# Использовать режим совместимости с клиентами MySQL 3.x и MySQL 4.0.
old-passwords
# Кодировка баз данных по умолчанию.
default-character-set = cp1251
init-connect = "set names cp1251"
skip-character-set-client-handshake
# Временная директория.
tmpdir = /tmp
#
# Обработывать запросы ТОЛЬКО с локальной машины (повышает безопасность).
# Если вы хотите, чтобы MySQL-сервер был доступен из сети,
# уберите следующую ниже директиву.
#
bind-address = 127.0.0.1
# Порт сервера.
port = 3306
socket = /tmp/mysql5.sock
lower-case-table-names = 2
# Различные настройки, оптимизированные для небольшого объема памяти.
skip-locking
key_buffer = 16K
max_allowed_packet = 16M
table_cache = 4
sort_buffer_size = 64K
read_buffer_size = 256K
read_rnd_buffer_size = 256K
net_buffer_length = 2K
thread_stack = 64K
#
# Поскольку InnoDB и BerkeleyDB обычно не используются, в Денвере в
# пакете с MySQL5 они по умолчанию выключены. Для включения этих типов
# таблиц закомментируйте две нижеследующие строки.
# Внимание! Включение InnoDB/BDB увеличивает требования к оперативной
# памяти. Кроме того, это может привести к существенному замедлению
# (до нескольких минут) запуска MySQL на Win9x
skip-innodb
skip-bdb
#
# Вообще не слушать TCP/IP порт. Это может служить для усиления
# безопасности, если все процессы, работающие с демоном MySQL, запущены
# на том же хосте. Однако при этом всё взаимодействие может проиходить
# ТОЛЬКО через сокеты Unix или именованные каналы Windows (доступны лишь
# в NT-версиях, при использовании mysqld-nt или mysqld-max-nt). Если
# в Windows при этом НЕ включить опцию "enable-named-pipe", демон MySQL
# станет бесполезен
#skip-networking
# См. коментарий выше
#enable-named-pipe
# Server ID.
server-id = 1
# Раскомментируйте для журналирования UPDATE-запросов
#log-bin
#
# Раскомментируйте следующие строки, если вы хотите изменить
# настройки InnoDB по умолчанию.
#
#innodb_data_home_dir = /usr/local/mysql5/var/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /usr/local/mysql5/var/
#innodb_log_arch_dir = /usr/local/mysql5/var/
# Вы можете установить .._buffer_pool_size размером до 50 - 80 %
# оперативной памяти, но опасайтесь перерасхода
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Устанавливайте .._log_file_size to 25 % от _buffer_pool_size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit=1
#innodb_lock_wait_timeout = 50
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[isamchk]
key_buffer = 8M
sort_buffer_size = 8M
[myisamchk]
key_buffer = 8M
sort_buffer_size = 8M
[mysqlhotcopy]
interactive-timeout
А то я не особо разбираюсь в настройке, мб косяк здесь?
Или как-то можно по-другому?
